Tuesday, July 26, 2011

Adding to the DC power cable for SATA Hard Disk

SATA Hard Disk has a different power socket with Hard Disk ATA, although the same amount of power cable that is yellow, black, black and red.
Have you ever experienced problems when the SATA power connector in conjunction with ATA power, and it turns out the Hard Disk is not detected, even though you've tried with another socket even repeatedly. You may suspect the SATA data cable, but if you have ensured a good sata data cable and it still is not detected then further suspicion is lest your damaged Hard Disk.
You will also be confused when the Hard Disk which can be detected normally thought to damage when you use the sata power directly inherited from the Power Supply.
well it turns out this SATA Power connector cable will work very well for Hard Disk 300 GB Sata down.
As for Hard Disk 500 GB SATA menyumplai up less maximal tension.
Just compare the number of ordinary SATA power cable with a built directly from the Power Supply, it turns out different numbers, the innate power cable SATA Power Supply has a number of cable 5 is yellow = 12 volts, black = ground, black = ground, red = 5 volts, and orange = 3.3 volts.
This orange cable that makes the difference in voltage supply SATA Hard Disk, it can meet the required voltage kebutukah Hard Disk SATA 500 ​​GB and above.
If your PC Hard Disk SATA always wear more than one, you seabaiknya mempararelkan congenital SATA power cable from the Power Supply, by menyoldernya directly on the PCB Power Supply, or the SATA power cable Power Supply, which wrote that it's up to you the easiest, which is important SATA hard Disk you safe dengang supply enough voltage and stable.

No comments:

Post a Comment

Klik 2 kali untuk keluar

Device CPU